LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> A7 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels (Hood, Lids) >> (55 Hood, Lids) >> Hood >> Hood, Adjusting >> Height Adjustment Stop Buffer

Height Adjustment Stop Buffer

Fig 1: Identifying Height Adjustment Stop Buffer
GWWA55-10705Courtesy of AUDI OF AMERICA, LLC
  1. Stop Buffer
    • The stop buffer -1- also works as a strike guard.
  2. Hood
  3. Adjusting Buffer
    NOTE: The adjusting buffers -2- are used to adjust the height of the hood.
    • The adjusting buffer -2- must lightly contact the lock carrier when the hood is closed.
scientia non olet · About LEMON Manuals