Left/Right Seat Belt Positioning Motor -V413- / -V414-, Removing And Installing: Removing

Fig 1: Removing Seat Belt Positioning Arm

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the front belt end fitting. Refer to FRONT BELT END FITTING, REMOVING AND INSTALLING .

-- Pull the seat belt positioning arm -1- out of the seat belt positioning motor -arrow-.

-- Thread the seat belt webbing -2- together with the belt tongue out of the seat belt positioning arm.

-- Remove the side trim panel. Refer to SIDE TRIM PANEL, REMOVING AND INSTALLING .

-- Disconnect the connector -5-.

Fig 2: Identifying Seat Belt Positioning Motor Components

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -1, 3 and 4-.

-- Remove the seat belt positioning motor -2- on the seat belt relay -arrow-.