Airbag Connector, Replacing, Inserted Airbag Version: Installing

Fig 1: Release Connector Lock Using A Small Screwdriver And Disconnect Harness Connector

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

WARNING:

Follow all safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
Before handling pyrotechnic components (for example, connecting a connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.

-- Connect the connector -1- to the airbag igniter -arrow A-.

-- Press in the connector lock -2- -arrow B-. While doing this, the connector is pushed into the airbag igniter and locks into place.

Further installation is performed in reverse order of removal, while noting the following:

NOTE:

Make sure the connectors are installed all the way and engage audibly.