Cam Adjustment Actuator, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
CAUTION:
This Procedure Contains Mandatory Replaceable Parts. Refer To Component Overview Prior To Starting Procedure.
Mandatory Replacement Parts
- O-Ring - Cam Adjustment Actuator
-- Remove The Engine Cover. Refer To ENGINE COVER, REMOVING AND INSTALLING .
-- If Equipped, Remove The Connector Strip Bolts -arrow-.
-- Disconnect The Connectors -Arrows- From The Cam Adjustment Actuators.
-- Remove The Cam Adjustment Actuators -arrows-.