Cam Adjustment Actuator, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install In Reverse Order Of Removal And Note The Following:

Check The O-Rings For Damage

THE CAM ADJUSTMENT ACTUATOR PIN MUST BE BROUGHT INTO THE INSTALLATION POSITION.

Fig 1: The Cam Adjustment Actuator Pin Must Be Brought Into The Installation Position.
Courtesy of AUDI OF AMERICA, LLC

-- Press Down The Cam Adjustment Actuator Pin In Direction Of -arrow- By Hand.

The Adjusting Element Pin Must Not Be In The Outward Position.

-- Install the engine cover. Refer To ENGINE COVER, REMOVING AND INSTALLING .