LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> A5 2.0T >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 83 (Crankshaft, Cylinder Block (Servicing) [CABB, CABA, CABD, CAEA, CAEB, CDHB, CDNB, CDNC, CDHA, CDZA, CADA, CCUA, CFKA, CPMA, CAED, CPMB, CHJA, CPEA] (Coupe)) >> Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Ribbed Belt, Removing And Installing >> Ribbed Belt, Removing And Installing, Vehicles With Electro-Mechanical Power Steering >> Removing

Ribbed Belt, Removing And Installing, Vehicles With Electro-Mechanical Power Steering: Removing

WARNING: This page is about a different variant/trim than selected.
CAUTION:

- When performing procedures near the radiator maintain a distance to the radiator.

GWWA13-10904Courtesy of AUDI OF AMERICA, LLC
CAUTION:

- Mark the running direction before removal.

- Pay attention to the running direction when reinstalling.

-- Turn the tensioner in the direction of -arrow- to release the tension on the ribbed belt.

-- Lock the tensioner using the :T10060A  .

-- Remove the ribbed belt.

scientia non olet · About LEMON Manuals