LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> A5 2.0T >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 83 (Crankshaft, Cylinder Block (Servicing) [CABB, CABA, CABD, CAEA, CAEB, CDHB, CDNB, CDNC, CDHA, CDZA, CADA, CCUA, CFKA, CPMA, CAED, CPMB, CHJA, CPEA] (Coupe)) >> Crankshaft, Cylinder Block >> Balance Shaft >> Balance Shaft, Removing And Installing >> Balance Shaft, Removing And Installing, Exhaust Side >> Removing

Balance Shaft, Removing And Installing, Exhaust Side: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the radiator. Refer to RADIATOR/RADIATOR FAN .

-- Remove the balance shaft drive chain. Refer to BALANCE SHAFT DRIVE CHAIN, REMOVING AND INSTALLING .

-- Remove the bolt -1- on the exhaust camshaft balance shaft.

GWWA15-10467Courtesy of AUDI OF AMERICA, LLC

-- Insert the :T10394/1  from the :T10394  .

GWWA15-10772Courtesy of AUDI OF AMERICA, LLC

-- Insert the :T10394  and push the sliding sleeve in the direction of -arrow-.

GWWA15-10773Courtesy of AUDI OF AMERICA, LLC

-- Install the :T10055  into the :T10394  and remove the balance shaft.

GWWA15-10774Courtesy of AUDI OF AMERICA, LLC