LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> A5 2.0T >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 82 (Crankshaft, Cylinder Block [CABB, CABA, CABD, CAEA, CAEB, CDHB, CDNB, CDNC, CDHA, CDZA, CADA, CCUA, CFKA, CPMA, CAED, CPMB] (Coupe)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Sub-Assembly Bracket, Removing And Installing >> Auxiliary Components Bracket, Removing And Installing, Vehicles With Hydraulic Power Steering >> Installing

Auxiliary Components Bracket, Removing And Installing, Vehicles With Hydraulic Power Steering: Installing

WARNING: This page is about a different variant/trim than selected.

Additional procedures:

-- Install the power steering pump. Refer to OVERVIEW - POWER STEERING PUMP .

-- Install the A/C compressor. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING .

-- Install the generator. Refer to GENERATOR .

-- Install the ribbed belt tensioner. Refer to CHARGE AIR SYSTEM .

NOTE:

Used coolant cannot be used again.

-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .

scientia non olet · About LEMON Manuals