Turbocharger, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
Preliminary Work May Be Required Depending On The Model. Refer To TURBOCHARGER, REMOVING AND INSTALLING .
-- Loosen The Hose Clamp -Arrow-, Remove The Air Duct Hose And Pivot It To The Side.
-- Disconnect The Connectors -1 And 2- And Free Up The Wire.
-- Loosen The Bolts -1- From Above.
-- Remove The Bolt -2- From Below.
-- Remove The Bolts -Arrows- On The Oil Return Line.
-- Remove The Nuts -Arrows-.
-- Remove The Turbocharger Upward With The Exhaust Manifold.