Overview - Charge Air Hose Connections: Notes
WARNING: This page is about a different variant/trim than selected.
With Hose Clamps
- The Hose Connections As Well As Air Duct Pipes And Hoses Must Be Free Of Oil And Grease Before Installing.
- Secure All Hose Connections With Hose Clamps That Match The Ones Used In Series Production.
- In Order To Be Able To Securely Mount The Air Duct Hoses On Their Connections, Spray The Bolts On The Previously Used Screw-Type Clamps With Rust Remover Before Installing.
Hose Clamps On The Hooks On The Pressure Side -Arrows-.
- To Remove The Air Duct Hose, The Screw-Type Clamp Must Be Loosened Enough.
- Loosened Screw-Type Clamps Can Be Reused.