Coolant Pump Toothed Belt, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
Depending on the model, preliminary work may be required. Refer to COOLANT PUMP TOOTHED BELT, REMOVING AND INSTALLING .
-- Remove the bolts -arrows- and remove the toothed belt guard.
TIP:
The drive wheel bolt has left-hand thread.
-- Loosen the bolt on the coolant pump drive wheel -1- clockwise in the direction of -arrow- and unscrew it three turns using the :VAG1410 and the : T10360 .
-- Remove the toothed belt -2-.