Overview - Spur Gear For Bearing And Center Differential
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2015 Audi S4, 2015 Audi A4 Quattro, and 2014 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
- Output Shaft
- Transmission Cover
- Outer Race/Tapered Roller Bearing
- Removing and installing. Refer to OVERVIEW - TRANSMISSION COVER -item 5- (See illustration 72).
- Inner Race/Tapered Roller Bearing
- Needle Bearing
- Spur gear bearing on the output shaft
- Spur Gear
- Side shaft drive wheel
- Inner Race/Tapered Roller Bearing
- Outer Race/Tapered Roller Bearing
- Shim
- For bearing pre-load on the spur gear tapered roller bearing, refer to -item 6- "Spur Gear".
- Selecting thickness. Refer to SPUR GEAR TAPERED ROLLER BEARING PRE-LOAD, DETERMINING .
- Gear Carrier
- Spacer Sleeve
- Shim
- For positioning the center differential
- Selecting thickness. Refer to ADJUSTING SHIM "S .
- Small Ball Bearing
- Center Differential
- Removing and installing. Refer to CENTER DIFFERENTIAL HOUSING, REMOVING AND INSTALLING .
- Servicing only by the manufacturer
- Large ball bearing