Engine, Removing: Notes
Special Tools And Workshop Equipment Required
- Engine Sling:2024A
- Engine Support Bridge:10-222A
- Engine/Gearbox Support Shackle (2 pc.):10-222A/12
- Pry Lever:80-200
- Shop Crane:VAS6100
- Engine Bung Set:VAS6122
- Shop Crane - Drip Tray:VAS6208
- Hose Clip Pliers:VAS6362
- Engine and Gearbox Jack:VAS6931
- Locking Pin:T10060A for vehicles with electromechanical power steering
- Engine/Gearbox Jack - Gearbox Support:T10337
- Belt Tensioner Locking Tool:T40098 for vehicles with hydraulic power steering
- Reversing Light Switch Connector Release Tool:T40138
- Puller - Sender Wheel 1: T40132
- Slide Hammer Set - Adapter 40:VW771/40
CAUTION:
This Procedure Contains Mandatory Replaceable Parts. Refer To Component Overview And Parts Information Prior To Starting Procedure.
Mandatory Replacement Parts
- Bolts - Engine mount
- Bolts - Support
- Bolts- Engine to transmission
- O-rings - Refrigerant lines
- O-rings - Transmission lines