Cylinder Head, Removing And Installing: Notes
Special Tools And Workshop Equipment Required
- Spark Plug Removal Tool :3122B
- Engine Bung Set :VAS6122
- Hose Clip Pliers :VAS6362
- Polydrive Bit Drive Socket :T10070
- Wrench - 21mm :T40263
- Socket - Xzn 12 :T40270
- Adapter :T40314
- 24 mm Socket
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.
Mandatory Replacement Parts
- Refer to OVERVIEW - CYLINDER HEAD
- Refer to OVERVIEW - TURBOCHARGER