LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> A5 2.0T >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Crankshaft, Cylinder Block [CABB, CABA, CABD, CAEA, CAEB, CDHB, CDNB, CDNC, CDHA, CDZA, CADA, CCUA, CFKA, CPMA, CAED, CPMB] (Cabriolet) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Sub-Assembly Bracket, Removing And Installing >> Auxiliary Components Bracket, Removing And Installing, Vehicles With Electro-Mechanical Power Steering >> Installing

Auxiliary Components Bracket, Removing And Installing, Vehicles With Electro-Mechanical Power Steering: Installing

Additional Procedures: 

-- Install the A/C compressor. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING / OVERVIEW - A/C COMPRESSOR POWER UNIT .

-- Install the generator. Refer to GENERATOR, REMOVING AND INSTALLING .

-- Install The Ribbed Belt. Refer to RIBBED BELT, REMOVING AND INSTALLING [CAEB, CAED, CPMA, CPMB] .

NOTE:

Used coolant cannot be used again.

-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .

scientia non olet · About LEMON Manuals