Ribbed Belt, Removing And Installing, Vehicles With Electro-Mechanical Power Steering: Installing

Install In Reverse Order Of Removal And Note The Following: 

-- Install the ribbed belt. Refer to Figure.

-- Pivot the tensioner slightly clockwise in direction of -arrow- and remove the :T10060A  .

Fig 1: Ribbed Belt For Vehicles With Electro-Mechanical Power Steering

Courtesy of AUDI OF AMERICA, LLC

-- Release the tension on the tensioner.

-- Check whether the ribbed belt is routed correctly.

-- Start the engine and check whether the ribbed belt runs correctly.