Oil Pan Lower Section, Removing And Installing: Removing
- Engine oil drained. Refer to ENGINE OIL .
Depending on the model, preliminary work may be required. Refer to the appropriate service information in OIL PAN LOWER SECTION, REMOVING AND INSTALLING [CAEB, CAED, CPMA, CPMB] .
-- Disconnect the connector from the Oil Level Thermal Sensor -G266- -arrow-.
-- Remove the bolts -1 through 19-.
-- Remove the oil pan, if necessary loosen by applying light strikes with a rubber hammer.
-- If the oil pan lower section is replaced, remove the Oil Level Thermal Sensor -G266-. Refer to Oil Level Thermal Sensor -G266-, REMOVING AND INSTALLING .