LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> A5 2.0T >> Repair and Diagnosis >> Engine Mechanical >> Exhaust >> Exhaust System, Emission Controls [CABB, CABA, CABD, CAEA, CAEB, CDHB, CDNB, CDNC, CDHA, CDZA, CADA, CCUA, CFKA, CPMA, CAED, CPMB] (Cabriolet) >> 26 Exhaust System, Emission Controls >> Exhaust Pipes/Mufflers >> Tail Pipes, Replacing >> Tail Pipes, Replacing, Vehicles With Two Rear Mufflers >> Procedure

Tail Pipes, Replacing, Vehicles With Two Rear Mufflers: Procedure

-- Separate the tailpipe -1- at the separating point -C- using :VAS6254  .

Fig 1: End Pipe, Replacing
GWWA26-0475Courtesy of AUDI OF AMERICA, LLC

-- Connect the tailpipe -3- up to marking -A- so that slot on tailpipe lines up with marking -B-.

-- Tighten clamping sleeve nut -2-.