LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> A5 2.0T >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Cooling System [CABB, CABA, CABD, CAEA, CAEB, CDHB, CDNB, CDNC, CDHA, CDZA, CADA, CCUA, CFKA, CPMA, CAED, CPMB] (Cabriolet) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Small Coolant Pipe, Removing And Installing >> Removing

Small Coolant Pipe, Removing And Installing: Removing

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Loosen the hose clamps -arrows- and remove the air duct hose.

Fig 1: Air Intake Hose Components
GWWA21-10302Courtesy of AUDI OF AMERICA, LLC

Vehicles Hydraulic Power Steering: 

Fig 2: Electrical Connectors And Bolts
GWWA19-10451Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the connectors -1 through 3- from the bracket.

Vehicles with Electro-Mechanical Power Steering:

Fig 3: Identifying Bolts And Connectors
GWWA19-11508Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the connectors -1 through 3- from the bracket.

Continuation For All Vehicles: 

Fig 4: Small Coolant Pipe
GWWA19-10771Courtesy of AUDI OF AMERICA, LLC

-- Loosen hose clamp -1- and lift the clamp -2- to remove the coolant hoses.

-- Remove the bolts -arrows- and remove the small coolant pipe.