Balance Spring, Disengaging And Engaging: Engaging

-- First install the left and right springs -A- into the lower hole in each brake pad -C-.

Fig 1: Balance Springs Installed Correctly To Guide Bolts And Brake Pads

Courtesy of AUDI OF AMERICA, LLC

-- Then engage them into the left and right guide pins -B- with pliers.

CAUTION:

Make sure the springs are installed correctly to the guide bolts and brake pads -arrows-.

Making sure the springs -arrows- are installed correctly

Fig 2: Balance Springs Installed Correctly To Guide Bolts And Brake Pads

Courtesy of AUDI OF AMERICA, LLC