Seat Pan Cover And Cushion, Removing And Installing, Bucket Seat: Removing

Fig 1: Removing Bucket Seat Cover

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the seat pan. Refer to SEAT PAN, REMOVING AND INSTALLING .

-- Loosen the Velcro fastener -2-.

-- Pry the clamping strip at the edge of the seat cover -3- out from around the guide on the seat pan.

-- Disengage the rear retaining strip -1- on the seat pan.

-- Disengage the clamping strip -1- from the brackets -arrow- on the seat pan cushion and loosen the Velcro fastener -3- on the seat pan cushion -2-.

Fig 2: Detaching Retaining Strip -1- From Holders -Arrow- At Seat Pan Cushion

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the seat pan cover.

-- Remove seat bolster inflation adjuster -2- from retaining bracket -3- for the seat pan -arrow-.

Fig 3: Disengaging Flap With Air Cushion For Seat Bolster Inflation Adjustment

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the pneumatic hose -1- for seat bolster inflation adjuster at the Y-piece.

-- Remove the seat pan cushion with the seat bolster inflation adjuster.