LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> A4 2.0T >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Clutch - Manual Transmission 0B2 AWD (Coupe) (As Of 02.2012)) >> 30 Clutch >> Removal And Installation >> Over-Center Spring >> Removing

Over-Center Spring: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi S5, 2015 Audi S5, 2014 Audi S5, 2013 Audi A5, and 2012 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Driver Side Storage Compartment
GWWA68-10158Courtesy of AUDI OF AMERICA, LLC

-- Remove the instrument panel cover on the driver side. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .

-- Remove the left footwell vent. Refer to OVERVIEW - AIR ROUTING AND AIR DISTRIBUTION IN PASSENGER COMPARTMENT .

Fig 2: Identifying Footwell Vents
GWWA87-10491Courtesy of AUDI OF AMERICA, LLC

-- Actuate the clutch pedal -1- in direction of -arrow-. Press the T40025 over the stretched over-center spring -2-.

Fig 3: Actuating Clutch Pedal
GWWA30-10156Courtesy of AUDI OF AMERICA, LLC

-- Press the clutch pedal down as far as the stop and remove the over-center spring downward with the assembly clamp.