Seat pan cover and padding, removing and installing: Notes
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.
1 - Seat pan
- Removing and installing → Front seat backrest and seat pan, removing and installing
2 - Flap with air cushion for right seat bolster inflation adjustment
3 - Seat pan cushion
4 - Seat pan cover
Removing
- Remove seat → Seat, removing and installing .
- Remove seat pan → Front seat backrest and seat pan, removing and installing .
- Remove Velcro fastener on left and right from rear seat cover.
- Pry grip channel at edge of seat cover - 4 - all around out of guide at seat pan - 1 -.
- Carefully loosen seams of seat pan cover from Velcro fastener at seat pan cushion - 3 -.
- Remove seat cover.
Installing
Installation is reverse of removal.
5 - Y-piece
- Connects both pneumatic hoses to seat bolster inflation adjustment
6 - Flap with air cushion for left seat bolster inflation adjustment