LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> A4 2.0T >> Repair and Diagnosis >> External Pages >> Different car >> Section 1169 (Cylinder Head, VALVETRAIN [CAUA] (Coupe)) >> 15 Cylinder Head, VALVETRAIN >> Chain Drive >> Camshaft Timing Chain, Removing From Camshafts >> Installing >> -- Tighten The Camshaft Adjuster Bolts On The Left Cylinder Head As Follows:

-- Tighten The Camshaft Adjuster Bolts On The Left Cylinder Head As Follows:

WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Camshaft Adjuster Screws On Left Cylinder Head, Removal/Installation
GWWA13-10117Courtesy of AUDI OF AMERICA, LLC
Step Bolt Tightening Specification
2. -1- to the exhaust camshaft Final Tightening Specification
2. -2- to the intake camshaft Final Tightening Specification
scientia non olet · About LEMON Manuals