LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> A4 2.0T >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Hydraulic Components (Sedan) (As Of 09.2011) >> 47 Hydraulic Components >> Removal And Installation >> Vacuum Pump >> Brake System Vacuum Pump -V192- >> Notes

Brake System Vacuum Pump -V192-: Notes

The construction of the brake system vacuum pump -- depends on the engine.

The brake system vacuum pump -- is switched on by the engine control module depending on the intake line pressure.

Vacuum pump is not intended to be serviced. In case of complains, determine cause with help of function or seal test. If there is a malfunction, replace electrical vacuum pump.