LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> A4 2.0T >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Hydraulic Components (Sedan) (As Of 09.2011) >> 47 Hydraulic Components >> Removal And Installation >> Brake Fluid Reservoir Cover >> Installing

Brake Fluid Reservoir Cover: Installing

-- Place the brake fluid reservoir cover over the brake fluid reservoir.

-- Install the bolt -4- and tighten.

Fig 1: Identifying Brake Master Cylinder Components
GWWA47-10054Courtesy of AUDI OF AMERICA, LLC

-- Install plenum chamber cover, refer to PLENUM CHAMBER COVER, REMOVING AND INSTALLING .