LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> A4 2.0T >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Hydraulic Components (Sedan) (As Of 01.2014) >> 47 Hydraulic Components >> Vacuum System >> Brake Electric Vacuum Pump, Removing And Installing >> Brake Electric Vacuum Pump, Removing And Installing, Except RS 5 >> Installing

Brake Electric Vacuum Pump, Removing And Installing, Except RS 5: Installing

Install in reverse order of removal.

-- Press the right and left clip -arrow- into the bracket by hand and secure the Brake System Vacuum Pump -V192-.

Fig 1: Identifying Brake System Vacuum Pump V192 Upward From Bracket
GWWN47-0234Courtesy of AUDI OF AMERICA, LLC
NOTE:

Use new clamps when installing the vacuum line.