Overview - Seat Pan Cover And Padding, Seat Pan Without Seat Depth Adjuster
NOTE:
The assembly overview is based on a manual or power standard front seat and comfort seat.
- Cover
- Contour Wire
- Pushed into the cover
- Clipped in -item 3- (only with fabric covers)
- Clip
- Covered in foam padding (only with fabric covers)
- Retaining Channel
- Clipped in the clip -item 5-
- Sewn into cover
- Clip
- Covered in foam padding
- Retaining channel
- Sewn into cover
- For engaging the cover on the rear of the seat pan upper frame
- LATCH Child Seat Anchorage
- Vehicles equipped with: front passenger seat only
- Overview. Refer to OVERVIEW - FRONT CHILD SEAT ANCHORS .
- Cover Strap
- With clamping profile
- Clamping profile sewn into cover
- for engaging the cover on side of the seat pan upper frame
- Retaining Bracket
- for sill side trim
Manual Standard Front Seat
- Removing and Installing SILL SIDE TRIM RETAINING BRACKET, REMOVING AND INSTALLING, MANUAL STANDARD/SPORT SEAT
(retaining bracket not shown in the illustration)
Power standard front seat
- Removing and installing. Refer to SILL-SIDE TRIM RETAINING BRACKET, REMOVING AND INSTALLING, POWER STANDARD SEAT, WITH OR WITHOUT MEMORY FUNCTION .
- for sill side trim
- Cushion
- with wire placed in foam upholstery (only with leather covers)
- Cushion Clip
- Only with leather covers
- For securing the cover to the padding
- Always replace if removed
- Install in same location as before removal
- Retaining Channel
- Sewn into cover
- For engaging the cover on the front and side of the seat pan upper frame.
- Cover
- With padding
- Removing and installing. Refer to SEAT PAN COVER AND PADDING, REMOVING AND INSTALLING, SEAT PAN WITHOUT SEAT DEPTH ADJUSTER .
- Cover, Separating from Padding and Connecting. Refer to SEAT PAN COVER AND PADDING, SEPARATING, SEAT PAN WITHOUT SEAT DEPTH ADJUSTER .