Fastener Tightening Specifications
| Component | Bolt Size | Nm | ||
|---|---|---|---|---|
| Air Guide Pipe | 9 | |||
| Brace for the Turbocharger, Banjo Bolt (1) | 60 | |||
| Bracket for Wiring Harness | 8 | |||
| Charge Air Pressure Sensor / Intake Air Temperature (IAT) Sensor | 5 | |||
| Clamp (1) | 7 | |||
| Connecting Pipe, Nut | 20 | |||
| Control Pipe (1) | 23 | |||
| Control Wire | 23 | |||
| Filter for Exhaust Gas Recirculation (EGR) system | ||||
| Hex Stud | 20 | |||
| Nut | 23 | |||
| Heat Shield | 20 | |||
| Intake Scoop | 8 | |||
| Left Air Guide Pipe | 9 | |||
| Mount | 5 | |||
| Oil Return Line | 15 | |||
| Oil Supply Line Bracket | 10 | |||
| Oil Supply Line | 22 | |||
| Turbocharger, Nut (1) | 23 | |||
| Warm Air Collector Plate | 8 | |||
|
||||