Install The Air Guide Hoses With The Coupling

Fig 1: Identifying Clip In Release And Lock Positions

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Replace the sealing ring if it is damaged.

Make sure the sealing ring sits completely in the groove all around the air guide pipe/hose.

Coat the sealing surface and the sealing ring with silicone-free lubricant.

-- Pull the securing clip into the release position -1-.

-- Insert the air guide pipe/hose as far as the stop and press the securing clip into the locked position -2-.

-- Press the air guide pipe/hose on and pull on it to make sure the connection is engaged correctly.