LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> TT S, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 75 (2.0L - Engine Assembly - Engine Code(S): CETA & CCTA (Roadster)) >> Engine Assembly >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different variant/trim than selected.
Component Bolt Size Nm
Bracket to Engine Mount (1) - 20 + 90°
Bracket to Body (1) - 20 + 90°
Engine Mount with Support Arm (1), (2)
  - 40 + 90°
  - 60 + 90°
Engine Support With Support Arm (1) - 40 + 180°
Bolts/Nuts
  M6 10
  M7 15
  M8 22
  M10 40
  M12 65
(1) Always replace
(2) For bolt tightening clarification, refer to SUBFRAME ASSEMBLY OVERVIEW  and see items -6, 10 and 11-

  • 1
  • 2

Attaching the S-Tronic Transmission 02E to the engine 

Fig 1: Direct Shift Automatic Transmission To Engine Mounting Bolts
GWWA34-10045Courtesy of AUDI OF AMERICA, LLC
Item Bolt Nm
1, 3, 10 M12x55 80
5, 9 M12x70 80
6, 7, 8 M10x50 40
A Alignment sleeves for centering
scientia non olet · About LEMON Manuals