LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> TT S, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 72 (2.0L - Crankshaft, Cylinder Block - Engine Code(S): CCTA & CETA (Roadster)) >> 13 Crankshaft, Cylinder Block >> Specifications >> Crankshaft Dimensions

Crankshaft Dimensions

WARNING: This page is about a different variant/trim than selected.

(Dimensions in mm)

Reconditioning Dimension (1) Crankshaft Bearing Pin Diameter Connecting Rod Bearing Pin Diameter
Basic dimension 58.00 47.80
(1) The preparation of worn crankshafts is not provided.
scientia non olet · About LEMON Manuals