LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> TT S, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 69 (2.0L - Exhaust System, Emission Controls - Engine Code(S): CCTA & CETA (Roadster)) >> 26 Exhaust System, Emission Controls >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different variant/trim than selected.
Component Bolt Size Nm
Bracket for Exhaust System, Nut/Bolt - 23
Front Exhaust Pipe with Catalytic Converter and Front Muffler, Nut - 40
Oxygen Sensors3 - 55
Suspended Mount - 23
Transverse Beam - 23
  • Always replace
  • Coat turbocharger stud bolts with hot bolt paste.
  • Only use hot bolt paste to grease the threads