Engine, Securing To Engine And Transmission Holder

WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Lifting Tackle 3033
Engine Support 3269
Engine and Transmission Holder VAS 6095
Shop Crane VAS 6100

Procedure

-- Engage 3033 on engine and on VAS 6100 as shown in illustration.

Fig 1: Hooking Engine Sling 3033 Onto Engine And Onto Workshop Crane VAS 6100

Courtesy of AUDI OF AMERICA, LLC

-- Raise the engine from the VAS 6100 using the T40074.

Engine, engaging on transmission side

-- Secure transmission side of VAS 6095 on cylinder block as shown in illustration.

Fig 2: Identifying Engine And Transmission Holder VAS 6095

Courtesy of AUDI OF AMERICA, LLC

Engine, engaging at sides

-- Secure sides of 3269 to cylinder block as shown in illustration.

Fig 3: Identifying Engine Support 3269 Tightly Bolted To Cylinder Block

Courtesy of AUDI OF AMERICA, LLC

-- Secure engine to VAS 6095 with 3269.