Crankshaft Dimensions
WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.
(Dimensions in mm)
| Honing Dimension | Crankshaft Bearing Pin Diameter | Connecting Rod Bearing Pin Diameter | ||||
|---|---|---|---|---|---|---|
| -0.017 | -0.022 | |||||
| Basic dimension | 54.00 | 47.80 | ||||
| -0.037 | -0.042 | |||||
| -0.017 | -0.022 | |||||
| 1st oversize | 53.75 | 47.55 | ||||
| -0.037 | -0.042 | |||||
| -0.017 | -0.022 | |||||
| 2nd oversize | 53.50 | 47.30 | ||||
| -0.037 | -0.042 | |||||
| -0.017 | -0.022 | |||||
| Stage III | 53.25 | 47.05 | ||||
| -0.037 | -0.042 | |||||