Special Tools

WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Special Tools - Crankshaft Oil Seal - Belt Pulley End, Replacing (For PTFE Seals)

Courtesy of AUDI OF AMERICA, LLC

Special tools and workshop equipment required

Seal Remover 3203
Counter Support 3415
Assembly Tool T10053
Torque Wrench 5-50 Nm V.A.G 1331
Torque Wrench 40-200 Nm V.A.G 1332

Special tools and workshop equipment required

Dial Gauge Holder VW 387

Fig 2: Dial Gauge Holder VW 387
Courtesy of AUDI OF AMERICA, LLC
Dial Gauge 0-10 mm VAS 6079

Fig 3: Dial Gauge VAS 6079
Courtesy of AUDI OF AMERICA, LLC
Locking Pin T10060A

Fig 4: Identifying Locking Pin T10060 A
Courtesy of AUDI OF AMERICA, LLC
Flywheel Retainer 3067

Fig 5: 3067 Counter-Hold Tool
Courtesy of AUDI OF AMERICA, LLC
Puller T10055

Fig 6: Identifying Puller T10055
Courtesy of AUDI OF AMERICA, LLC
With Adapter T10055/3
Centering Mandrel 3176

Fig 7: 3176 Centering Mandrel
Courtesy of AUDI OF AMERICA, LLC
Press Tube 30 - 100

Fig 8: Press Tube 30 - 100
Courtesy of AUDI OF AMERICA, LLC
Thrust Piece 40 - 105

Fig 9: Identifying Thrust Piece 40-105
Courtesy of AUDI OF AMERICA, LLC
Drift VW 207 C