Engine And Transmission, Separating

WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.

Engine/transmission assembly removed and mounted on engine/transmission supportT10012.

-- Remove the bolt -1- from mounted transmission.

Fig 1: Identifying Bolt & Small Cover Plate, Removal/Installation

Courtesy of AUDI OF AMERICA, LLC

-- Remove the shield -2- upward and out.

NOTE:

Shown in the illustration with transmission removed.

-- Remove bolts -1 through 8- at engine/transmission flange.

Fig 2: Identifying Bolts On Engine/Transmission Flange, Removal

Courtesy of AUDI OF AMERICA, LLC

-- Remove the starter.

-- Pull transmission off from engine.