LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> TT S, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Final Drive, Differential - Manual Transmission 02Q AWD (Roadster)) >> 39 Final Drive, Differential >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.
Component Bolt Size Nm
Bevel Box1   40 + 45°
Bevel Box Output Flange
()  1
  480
Drain Plug   60
Flange Shaft, Left
()  1
  33
Right Drive Flange
()  1Always replace
  33
  • () Always replace