Transmission Tightening Specifications
WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- The tightening specifications apply only to lightly greased, oiled, phosphated, or black-finished nuts and bolts.
- Additional lubricant such as engine or transmission oil may be used, but do not use graphite lubricant.
- Do not use degreased parts.
- Tolerance for tightening specification ± 15%.
Transmission to engine mounting
| Item | Bolt | Nm |
|---|---|---|
| 1, 3, 6 | M12x55 | 80 |
| 5 | M12x65 | 80 |
| 7, 8 | M10x50 | 40 |
| 9 | M10x45 | 40 |
| 10 | M12x70 | 80 |
| A | Alignment sleeves for centering | |
NOTE:
Ignore items -2 and 4-.
- Additional tightening torques, refer to SUBFRAME MOUNT ASSEMBLY OVERVIEW .