Selector Mechanism Connectors, Checking
WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.
If selector mechanism malfunctions, proceed as follows:
-- Connect Vehicle Diagnosis, Testing, and Information SystemVAS 5051B.
-- Check DTC memory - complete system, if necessary, determine malfunction in guided fault finding and correct.
A - 10-pin connector for connecting wires from selector mechanism to the transmission (with CAN-Bus lines)
B - 4-pin connector to shift lock solenoid -N110- and selector lever park position lock switch -F319-
C - 10-pin connector to selector mechanism cover