Fastener Tightening Specifications

Component	Bolt Size	Nm
Air Guide Pipe, Nut/Bolt	-	10
Bearings For charge air cooler	-	5
Bracket to Turbocharger^{5, 6}	-	30
Bracket to Turbocharger⁷	-	23
Charge Air Pressure Sensor	-	5
Connection	-	7
Coolant Supply Pipe
-Bolt	-	23
-Banjo Bolt	-	35
Fastening Strip^{1, 2}	-	30
Heat Shield	-	9
Oil Return Pipe³	-	9
Oil Return Pipe⁴	-
-Bolt	-	9
-Banjo Bolt	-	35
Oil Supply Pipe
-Bolt	-	9
-Banjo Bolt	-	30
Turbocharger, Nut^{1, 2}	-	21
Turbocharger Recirculating Valve	-	7
Turbocharger Vacuum Diaphragm
-Bolts¹	-	9
-Lock Nut⁸	-	9
Ring Connection, Banjo Bolt	-	8
Wastegate Bypass Regulator Valve	-	3
¹ Replace ² Coat the exhaust manifold threaded pins with hot bolt paste. ³ For bolt tightening clarification, refer to item Figure and see items -13, 16 and 18- ⁴ For bolt tightening clarification, refer to item Figure and see items -3, 5 and 6- ⁵ For bolt tightening clarification, refer to item Figure and see items -8 and 9- ⁶ Insert with hot bolt paste ⁷ For bolt tightening clarification, refer to item Figure and see items -11 and 12- ⁸ Secure with sealing wax after tightening