LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> TT Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Rear Final Drive 02D, 0AV, 0BR, 0BS & 0BY (Coupe)) >> 39 Final Drive, Differential >> Special Tools

Special Tools

WARNING: This page is about a different variant/trim than selected.
Fig 1: Right And Left Flange Shaft Seals (Rear Final Drive Installed)
GWWG39-10013Courtesy of AUDI OF AMERICA, LLC

Special tools and workshop equipment required 

Fig 2: Identifying Special Tools -- Rear Final Drive Flange/Drive Shaft Seal, Final Drive Installed, Replacing
GWWG39-10014Courtesy of AUDI OF AMERICA, LLC

Special tools and workshop equipment required 

Fig 3: Identifying Special Tools - Haldex Clutch Grooved Ball Bearing
GWWG39-10040Courtesy of AUDI OF AMERICA, LLC

Special tools and workshop equipment required 

Fig 4: Identifying Special Tools - Bonded Rubber Bushing
GWWW39-10059Courtesy of AUDI OF AMERICA, LLC

Special tools and workshop equipment required 

Fig 5: Identifying Special Tools - Rear Flexible Disc
GWWW34-0092Courtesy of AUDI OF AMERICA, LLC

Special tools and workshop equipment required 

Fig 6: Identifying Special Tools - Drive Shaft, Servicing (1 Of 2)
GWWW39-0151Courtesy of AUDI OF AMERICA, LLC

Special tools and workshop equipment required 

Fig 7: Identifying Special Tools -- Drive Shaft, Servicing (2 Of 2)
GWWW39-0152Courtesy of AUDI OF AMERICA, LLC

Special tools and workshop equipment required 

Special tools and workshop equipment required 

Edition 8 26 2011