Overview - Outer Tail Lamps
- Outer Tail Lamps
- Removing and installing, refer to TAIL LAMP AND BULB HOLDERS
- Align to body contour, refer to TAIL LAMP, ALIGNING TO BODY CONTOUR
- Clip Nut
- Central Connector
- For the bulb holder
- Bulb Holder
- Removing and installing, refer to TAIL LAMP AND BULB HOLDERS
- Left Back-Up Light
- Left Back-Up Lamp -M16-
- Right Back-Up Lamp -M17-
- 12V, 16 W
- Replacing, refer to TAIL LAMP AND BULB HOLDERS
- Cap Nut
- 3.5 Nm
- Adjusting Nut
- With sealing washer
- For adapting tail lamp to the body contour
- Rear Turn Signal Bulb
- Left Rear Turn Signal Lamp -M6-
- Right Rear Turn Signal Lamp -M8-
- 12V, 21 W (orange)
- Replacing, refer to TAIL LAMP AND BULB HOLDERS
- Cover