Rear seat heating switches, removing and installing
Special tools, testers and auxiliary items required
- Hook 3438
Removing
CAUTION:
- Switch off all electrical components.
- Switch ignition off and remove ignition key.
- Place air vents in center console (rear) in a horizontal position.
NOTE:
- Rear center console vent has openings for engaging hook 3438.
- Pull rear center console vent out of rear center console in - direction of arrow - using hook 3438.
- If installed, disconnect electrical harness connector at rear center console vent.
Fig 3: Identifying Left Rear Heated Seat Regulating Switch E128 And Right Rear Heated Seat Regulating Switch E129
- Reach through opening and release clips - arrows -.
- Remove Left Rear Heated Seat Regulating Switch E128 - 2 - and Right Rear Heated Seat Regulating Switch E129 - 1 - out of mount.
NOTE:
- Shown in illustration with rear center console removed.
- Disconnect electrical harness connector.
Installing
Installation is performed in the reverse order of removal.