Front footwell lights, removing and installing
NOTE:
- Footwell light bulb: 12 V, 5 W
- On vehicles with LED footwell light, entire footwell light must be replaced if LED is faulty.
Removing
- Press in catch - 1 - using a flat screwdriver and pry out footwell lamp - 2 -.
- Disconnect electrical harness connector - 3 -.
- Remove bulb (12 V, 5 W) from socket on back side of footwell lamp.
Installing
Installation is performed in reverse order of removal, noting the following:
- Insert footwell lamp into opening and engage on opposite side.