Headrest Trim, Removing And Installing: Removing

-- Remove The Headrests. Refer To HEADREST, REMOVING AND INSTALLING .

-- Press The Sides Of The Padding Away From The Trim -1- In The Direction Of The -arrow-.

Fig 1: Identifying Leg Spring

Courtesy of AUDI OF AMERICA, LLC

-- Bend The Leg Spring -2- Up Slightly Using A Wide Screwdriver.

-- Pull The Trim -1- Up At One Side At The Same Time Until It Disengages On One Side.

-- Perform The Same Step On The Other Side.

-- Remove The Trim -1- While Bending The Leg Spring -2- Up.