Overview - Rear Outer Three-Point Seat Belt

Fig 1: Exploded View Of Rear Outer Three-Point Seat Belt

Courtesy of AUDI OF AMERICA, LLC

1. Bolts
   • Do not change the bolt position when removing and installing, it is set by the manufacturer.
2. Belt Guide
   • Replace the entire belt guide if damaged.
   • Removing and installing. Refer to REAR SEAT BELT GUIDE, REMOVING AND INSTALLING .
3. Nut
4. Bolt
   • 45 Nm
   • If it was removed because of an accident, replace the bolt
5. Automatic Belt Retractor
   • Depending on the market version with Driver Side Rear Seat Belt Tensioner Igniter -N196-
   • Depending on the market version with Passenger Side Rear Seat Belt Tensioner Igniter -N197-
   • Removing and installing. Refer to REAR THREE-POINT SEAT BELT, REMOVING AND INSTALLING .
6. Noise Insulation
   • For the automatic belt retractor
7. Belt Webbing
8. Bolt
   • 45 Nm
   • If it was removed because of an accident, replace the bolt
9. Belt End Fitting
   • Removing and installing. Refer to REAR OUTER BELT END FITTING, REMOVING AND INSTALLING .