LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> S5 4.2, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 619 (Heating, Ventilation & Air Conditioning (2 Of 2) (As Of 06.2014)) >> 87 Air Conditioning >> Front Heater And A/C Unit >> Fresh Air Blower -V2-, REMOVING AND INSTALLING >> Installing

Fresh Air Blower -V2-, REMOVING AND INSTALLING: Installing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Installation is carried out in the reverse order while observing the following.

-- If the locking mechanism -A- breaks or can no longer hold, the Fresh Air Blower -V2- -B- can also be secured to the air intake housing with a bolt -C-.

-- When installing, make sure the Fresh Air Blower -V2- -B- fits correctly in air intake housing.

-- Turn on the ignition.

-- Check the DTC memory for the Climatronic Control Module -J255- display and control head and erase any displayed malfunctions, if necessary using the Vehicle Diagnostic Tester in the "Guided Fault Finding  " function.

-- To check the function, perform the output diagnostic test mode for the A/C system using the Vehicle Diagnostic Tester in the "Guided Fault Finding  " function.

scientia non olet · About LEMON Manuals