Footwell Vent Temperature Sensor -G192- /Left Footwell Vent Temperature Sensor -G261-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the driver seat as far back as possible.
-- Turn off the ignition.
-- Remove the storage compartment under the instrument panel on the driver side. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .
-- Disconnect the connector -A-.
-- Turn the sensor -B- 90° and remove it from the left (driver side) footwell vent.