LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> S5 4.2, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 542 (Final Drive & Differential - MULTITRONIC Transmission 0AW (Sedan) (As Of 11.2014)) >> 39 Final Drive, Differential >> Transmission Control >> Hydraulic Control Module, Removing And Installing

Hydraulic Control Module, Removing And Installing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2016 Audi A4, 2015 Audi A4, 2014 Audi A4, 2013 Audi A4, and 2012 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Procedure 

-- Remove end cover. Refer to END COVER, REMOVING AND INSTALLING .

-- Removing and installing the hydraulic control unit. Refer to HYDRAULIC CONTROL MODULE, REMOVING AND INSTALLING .

-- Install the cover. Refer to END COVER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals